As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

VTurboWay #32 Meat Grinder Knife Review: Who It Fits and Who Should Skip It

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

This VTurboWay part is a single aftermarket cross knife for size #32 meat grinders, sold as a replacement for Hobart heads. It is a spare part, so the review covers fit. Our pick reason is the clear sizing: a 15 mm square center hole and an 89 mm (3.5 inch) diagonal, in SS420 stainless steel. VTurboWay says it fits most standard #32 grinders but asks you to check your current knife first. Unlike its #12 listing, this one gives no list of grinders it does not fit, so measuring is the only check. The pack holds one knife weighing 3.52 ounces. We checked fit only against the sizes VTurboWay publishes; no knife was installed here.

What stands out

  • VTurboWay #32 knife
  • 15 mm square hole
  • 89 mm (3.5 in) diagonal
  • SS420, sold for Hobart

Who it fits

Good fit for

Shops and processors running a Hobart or other standard #32 grinder who want a lower-cost spare knife on the shelf.

Who should skip it

Anyone who needs an original Hobart part, or whose #32 knife does not measure 15 mm and 89 mm.

Verdict: A spare #32 knife worth having once the sizes match.

VTurboWay #32 knife specs explained

VTurboWay #32: 15 mm square hole

The #32 auger tip must seat in it.

89 mm (3.5 in) #32 diagonal

Measure your current knife tip to tip.

SS420 steel, VTurboWay #32

Hard stainless; keep it dry.

One VTurboWay #32 knife, 3.52 oz

Buy two if you rotate sharpening.

Aftermarket, sold for Hobart

Not a Hobart-made part.

What the VTurboWay #32 knife is

The #32 knife is a four-arm cross blade in SS420 stainless steel with a 15 mm square hole for the auger tip. The size fields give 3.9 by 3.9 by 0.5 inches, which matches the 89 mm diagonal plus packaging.

Fitting the VTurboWay #32 knife

Unplug the grinder, remove the ring, plate and old knife, and measure the old knife's hole and diagonal. If they match, fit the VTurboWay knife with its cutting face against the plate and tighten the ring. Wash and dry the knife after each shift and sharpen it together with its plate.

VTurboWay #32 knife checklist

Measure before ordering the VTurboWay #32.

Check before you buy

  • The old #32 cutter shows a 15 mm square center
  • Your #32 knife spans about 89 mm
  • An aftermarket VTurboWay knife is acceptable
  • One knife per pack suits you
  • Your grinder takes standard #32 parts

The product at a glance

VTurboWay Size 32 Stainless Steel Grinder Blade

Best for: Spare knife for #32 shop grinders

Grinder Head Size
#32
Material
Stainless Steel
Color
White
Use
Meat
Dimensions
3.9 × 3.9 × 0.5 inches
Weight
3.52 ounces

View on Amazon: VTurboWay Size 32 Stainless Steel Grinder Blade Affiliate link

VTurboWay's #32 replacement knife is SS420 stainless with a 15 mm square hole and a 3.5 in (89 mm) diagonal, sold for Hobart and other standard #32 grinders.

Pros

  • VTurboWay #32 sizes given: 15 mm, 89 mm
  • SS420 stainless steel
  • Sold for Hobart #32 heads
  • Single VTurboWay knife, 3.52 oz

Cons

  • VTurboWay #32 is not Hobart-made
  • One knife per pack
  • No VTurboWay not-fit list for #32

Good fit if

  • Your #32 knife has a 15 mm square hole
  • You run a Hobart-style #32 head

Skip if

  • You need an OEM Hobart knife
  • Your #32 knife measures differently

Verdict: A spare #32 knife for shop grinders, after measuring.

Specifications side by side

Spec VTurboWay Size 32 Stainless Steel Grinder Blade
Grinder Head Size #32
Material Stainless Steel
Color White
Use Meat
Dimensions 3.9 × 3.9 × 0.5 inches
Weight 3.52 ounces

Frequently asked questions

What grinders does the VTurboWay #32 knife fit?

VTurboWay sells it for Hobart and most standard #32 grinders, and asks buyers to check their current knife first.

What size is the VTurboWay #32 knife?

A 15 mm square center hole and an 89 mm (3.5 inch) diagonal.

Is the VTurboWay #32 knife stainless?

Yes, SS420 stainless steel.

VTurboWay #32 knife or Tesor #32 stuffing tubes?

They do different jobs: the knife replaces a worn #32 cutter, while the Tesor #32 tubes add four sausage sizes to a #32 head.

See also