VTurboWay #12 Meat Grinder Knife 2-Pack Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This VTurboWay listing is a pair of aftermarket cross knives for size #12 meat grinders, made of SS420 stainless steel. It is a spare part, not a grinder, so the review is about fit. Our pick reason is that VTurboWay gives the two numbers that decide fit: a 12 mm square center hole and a 61 mm (2.4 inch) diagonal. Just as useful, it lists grinders it does not fit, including the KitchenAid sausage maker, LEM #12 and 1224 countertop models, Cabela's #12, Chef's Choice and the Nesco FG-400PR. Measure your current knife before ordering. VTurboWay also warns the steel is fragile if dropped. This fit check relies on VTurboWay's own listing; we did not mount the knives.
What stands out
- VTurboWay #12 knife x2
- 12 mm square hole
- 61 mm (2.4 in) diagonal
- SS420 stainless
Who it fits
Good fit for
Owners of generic #12 electric or hand grinders whose current knife measures a 12 mm square hole and about 61 mm across.
Who should skip it
Owners of LEM, Cabela's, Chef's Choice, Nesco FG-400PR or KitchenAid grinders, which VTurboWay says it does not fit.
Verdict: A useful spare pair once you have measured your old knife.
VTurboWay #12 knife specs explained
VTurboWay 12 mm square hole
Must match your auger's square tip.
61 mm (2.4 in) knife diagonal
Measure tip to tip on your old knife.
SS420 VTurboWay steel
Hard edge; avoid dropping it.
Two VTurboWay knives per pack
Keep one sharp spare in the drawer.
Aftermarket VTurboWay part
Not made by your grinder's brand.
What the VTurboWay #12 knife is
Each piece is a four-arm cross knife with a square center hole that slides onto the auger tip and rides against the plate. VTurboWay makes it from SS420 stainless steel. The pack weighs 2.4 ounces and includes two identical knives.
Fitting the VTurboWay #12 knife
Take the ring, plate and old knife off your grinder and measure the old knife's center hole and diagonal. If they read 12 mm and about 61 mm, slide the new knife on with the flat cutting side facing the plate. Wash and dry it by hand after use and store it where it will not fall.
VTurboWay #12 knife checklist
Measure before ordering the VTurboWay pair.
Check before you buy
- Your old knife has a 12 mm square hole
- It measures about 61 mm tip to tip
- Your grinder is not on the VTurboWay not-fit list
- An aftermarket knife is acceptable
- You will store the SS420 knife safely
The product at a glance
VTurboWay #12 Stainless Steel Grinder Blades
Best for: Spare knives for generic #12 grinders
- Grinder Head Size
- #12
- Material
- Stainless Steel
- Color
- White
- Use
- Meat
- Weight
- 2.4 ounces
View on Amazon: VTurboWay #12 Stainless Steel Grinder Blades Affiliate link
VTurboWay sells this 2-pack of aftermarket #12 grinder knives in SS420 stainless, with a 12 mm square hole and 2.4 in (61 mm) diagonal; it lists brands it does not fit.
Pros
- Two VTurboWay #12 knives per pack
- SS420 stainless steel
- Exact VTurboWay sizes: 12 mm hole, 61 mm
- Clear not-fit list
Cons
- Aftermarket, not an OEM VTurboWay part
- Does not fit LEM #12 or KitchenAid
- VTurboWay warns the knife is brittle if dropped
Good fit if
- Your #12 knife has a 12 mm square hole
- You want a spare VTurboWay knife on hand
Skip if
- You own a LEM, Cabela's or Nesco #12
- You need an original-brand knife
Verdict: A cheap spare #12 knife pair, if your measurements match.
Specifications side by side
| Spec | VTurboWay #12 Stainless Steel Grinder Blades |
|---|---|
| Grinder Head Size | #12 |
| Material | Stainless Steel |
| Color | White |
| Use | Meat |
| Weight | 2.4 ounces |
Frequently asked questions
Does the VTurboWay #12 knife fit a LEM #12 grinder?
No. VTurboWay lists LEM #12 and the LEM 1224 countertop grinder as not fitting.
What size is the VTurboWay #12 knife?
A 12 mm square center hole and a 61 mm (2.4 inch) diagonal.
How many knives come in the VTurboWay pack?
Two #12 knives.
VTurboWay #12 pair or VTurboWay #32 knife?
Choose the #12 pair for #12 grinders with a 12 mm square hole; choose the #32 knife for #32 or Hobart-style heads with a 15 mm hole and 89 mm diagonal.
