KAI DH-3331 Seki Magoroku Extra Fine Julienne Slicer Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The KAI DH-3331 is a Seki Magoroku julienne slicer made in Japan for very fine strips, about 1 mm (0.04 inch) wide, of carrot, daikon, cucumber or potato. KAI uses a crank-shaped blade that cuts on both the push and the pull, and says the shape helps stop ingredients from clogging. A non-slip surface and a cutout for resting it steady on a bowl round out the design. It measures about 3.9 x 11.6 x 1.2 inches. The ABS body has a stated heat limit of 202°F (100°C), and the weight shows as 8.8 oz in the text but 3.68 oz in the specs, so those two figures conflict. No holder is listed. These points come from KAI's listing; we did not use the DH-3331.
What stands out
- About 1 mm DH-3331 strips
- Crank blade cuts push and pull
- Non-slip surface and bowl cutout
- Made in Japan by KAI
Who it fits
Good fit for
Cooks who want very fine julienne for Japanese salads, garnishes, kimchi or carrot slaw and prefer a small, flat tool.
Who should skip it
Anyone who wants slices or thicker sticks, a hand guard in the box, or a tool for big batches.
Verdict: A compact Japanese tool for extra-fine julienne; bring a guard or glove.
DH-3331 specs in short
Julienne about 1 mm wide
Fine strips for garnish and salads.
Crank-shaped blade
Cuts on both strokes; KAI says it resists clogging.
Non-slip surface
Helps it stay put while you work.
Cutout for stability
Lets it rest on a bowl rim.
3.9 x 11.6 x 1.2 in
Flat and short for a drawer.
ABS body, stainless blade
Body heat limit listed as 202°F (100°C).
KAI DH-3331 build
The DH-3331 is a flat ABS frame with a single row of stainless julienne teeth shaped like a crank, made in Japan. There are no settings: the strip width is fixed. The listing gives two weights, 8.8 oz and 3.68 oz, and two temperature figures that do not match each other, so treat both as rough.
Making fine julienne with the DH-3331
Rest the cutout on a bowl, hold the end of a peeled carrot or daikon and run it back and forth across the blade; strips form on both strokes. Stop when the piece gets short and finish by knife, since no holder is listed. Rinse the teeth under the tap with a brush after use.
Points to weigh on the KAI DH-3331
Fine julienne is the only job it does.
Check before you buy
- Strips about 1 mm wide are what you want
- You will stop before your fingers near the DH-3331 teeth
- Small batches are typical for you
- You can wash ABS by hand
- A flat, short tool suits your drawer
The product at a glance
KAI Seki Magoroku Extra Fine Julienne Slicer
Best for: Fine julienne garnish
- Cut Styles
- Julienne
- Blade Material
- Stainless steel
- Body Material
- ABS resin
- Dimensions
- 3.94 × 11.6 × 1.18 inches
- Weight
- 3.68 ounces
View on Amazon: KAI Seki Magoroku Extra Fine Julienne Slicer Affiliate link
The KAI DH-3331 is a made-in-Japan julienne slicer with a crank blade that cuts about 1 mm strips on both strokes.
Pros
- Very fine 1 mm strips
- Cuts on push and pull
- Short, flat body
Cons
- No holder listed
- Weight figures conflict
Good fit if
- You want fine julienne for salads
- You prefer a small tool
Skip if
- You want slices too
- You need a guard in the box
Verdict: A small Japanese tool for extra-fine julienne.
Specifications side by side
| Spec | KAI Seki Magoroku Extra Fine Julienne Slicer |
|---|---|
| Cut Styles | Julienne |
| Blade Material | Stainless steel |
| Body Material | ABS resin |
| Function | Julienne |
| Dimensions | 3.94 × 11.6 × 1.18 inches |
| Weight | 3.68 ounces |
| Size | 3.9 x 11.6 x 1.2 inches |
| Color | black (black 19-3911tcx) |
| Model | DH-3331 |
Frequently asked questions
How wide are the KAI DH-3331 strips?
About 1 mm (0.04 inch).
Does the KAI DH-3331 cut on both strokes?
Yes, the crank blade cuts when pushing and pulling.
Does the KAI DH-3331 come with a hand guard?
KAI lists no holder or guard for the DH-3331.
Where is the KAI DH-3331 made?
In Japan.
