Benriner Super & Jumbo Replacement Review: Specs, Pros and Cons

What stands out

• Stainless steel body material for long-term use
• 6.4-inch width compatible with Super and Jumbo models
• 0.1-inch height provides precise slicing control
• Made in Japan for quality assurance
• Lightweight at 1.41 ounces for easy handling

Who it fits

Key specs explained

Body Material: Stainless steel

The blade is made from stainless steel, a material known for resisting rust and corrosion. This means the part will hold up well in a wet kitchen environment. You do not need to worry about immediate tarnishing after washing. It is easier to keep clean than carbon steel blades. This durability is essential for any food prep tool that sees frequent use and contact with acidic foods.

Width: 6.4 inches

This measurement defines the cutting edge length. A 6.4-inch width fits specific Benriner mandolin models, specifically the Super and Jumbo variants. You must verify your existing unit matches this dimension before purchasing. It ensures the blade aligns correctly with the main body. Buying the wrong width results in a part that will not fit or function safely on your current slicer.

Height: 0.1 inches

The blade thickness is very thin at 0.1 inches. This low profile allows for precise, thin slicing of vegetables and fruits. It reduces the amount of food wasted between cuts. The slim design also makes it easier to clean without food getting trapped in thick gaps. This spec is critical for achieving uniform slices in professional or home cooking settings.

Weight: 1.41 ounces

The unit weighs only 1.41 ounces, making it extremely lightweight. This low mass makes the blade easy to handle and store. It also means the replacement part adds negligible weight to the overall mandolin assembly. You can lift and replace it quickly without strain. This lightness is typical for thin steel blades but ensures the main unit remains balanced during use.

Design and build quality

According to the listing, the Benriner Super & Jumbo Replacement Flat Blade is constructed entirely from stainless steel. This material choice matters because stainless steel resists rust and corrosion. You can wash this part without fearing immediate tarnishing or degradation from water exposure. The silver finish is consistent with the metal body, offering a uniform look that aligns with standard kitchen tool aesthetics. It is made in Japan, which often signals specific manufacturing standards for precision tools.

The blade itself is a flat design, intended to fit the main body of Benriner mandolins. Its dimensions are 6.4 inches in width and 0.1 inches in height. The listing notes the length as 0.9 inches and the overall width as 2.5 inches for the flat blade variant. This specific geometry ensures it sits correctly within the slicer’s frame. You will find two variations available: one for the 2.5-inch wide body and another for the 3.7-inch and 4.7-inch widths. This distinction is critical for compatibility.

Weight is listed at 1.41 ounces. This light mass means the replacement part will not add noticeable bulk or imbalance to your mandolin. It is a simple, functional component with no complex controls or electronic features. The design relies purely on the sharpness and stability of the steel edge. You should verify your mandolin’s width before purchasing to ensure the correct blade pattern matches your existing main body.

Setup and daily use guide

This item is a replacement component, not a complete appliance. You will install this flat blade into an existing Benriner mandolin base. The listing specifies it fits the Super and Jumbo models, which correspond to 95 mm and 120 mm main body widths. Check your current slicer’s width before installation to ensure compatibility. The blade measures 6.4 inches in width and 0.1 inches in height. Its compact dimensions mean it sits flush within the mandolin’s frame. You do not need additional tools or complex assembly steps. Simply align the new blade with the mounting slots on your existing unit. The stainless steel construction implies straightforward maintenance. You can rinse the part under water after use. The material resists rust, so you do not need to dry it immediately to prevent damage. However, keeping it dry extends its lifespan. The blade weighs only 1.41 ounces. This light weight makes handling easy during cleaning or storage. You can store the spare blade in a dry drawer. The product is made in Japan, which often indicates consistent manufacturing standards. You get only the flat blade, so you must already own the main body. This is a cost-effective way to restore slicing performance without buying a new machine. Use it for uniform cuts of vegetables, fruits, or proteins. The sharp edge provides precision when you are preparing meals. Regular cleaning keeps the blade functioning well. Avoid abrasive cleaners that might scratch the stainless steel surface. Wipe it with a soft cloth. This part integrates seamlessly into your current kitchen workflow. It replaces worn or dull blades to maintain consistent slicing results. You benefit from the durability of stainless steel in daily food preparation tasks.

Before you buy this blade

You need an existing Benriner mandolin base to use this part. It is not a standalone slicer. The listing confirms it fits the Super and Jumbo models, which are 95 mm and 120 mm wide. Check your current blade size before ordering. You will also need a cleaning brush. Stainless steel resists rust, but hand washing is best. Dry it immediately after use. Store it in a safe place. This part fits into the broader category of food prep appliances. It complements your existing mandolin. It does not replace other tools like food processors. You should keep it alongside your main slicing device. This blade is a simple, durable upgrade. It extends the life of your mandolin. You do not need extra accessories for basic slicing. Just ensure your base is compatible. This part is for users who already own the main unit. It is a practical addition to your kitchen tools.

Check before you buy

• Verify your mandolin is a Super or Jumbo model.
• Check the blade width matches 95 mm or 120 mm.
• Ensure you have a compatible base unit ready.
• Confirm you have a cleaning brush for maintenance.
• Plan for immediate drying after hand washing.

The product at a glance

1

Benriner Super & Jumbo Replacement Flat Blade

Best for: Replacing blades on Benriner No. 95 & Jumbo slicers

Body Material

Stainless steel

Color

Silver

Dimensions

0.9 × 6.4 × 0.1 inches

Weight

1.41 ounces

View on Amazon: Benriner Super & Jumbo Replacement Flat Blade Affiliate link

This is a replacement flat blade for Benriner mandolins, specifically the No. 95 and Jumbo No. 120 models. It measures 6.4 inches wide and is constructed from stainless steel. The blade weighs just 1.41 ounces and is made in Japan. You should use this if your original blade is dull or lost. It fits the main body of both 95 mm and 120 mm slicers. This is a direct replacement part for maintaining your slicing precision.

Pros

• Stainless steel body for durability
• Fits both 95 mm and 120 mm Benriner models
• Made in Japan
• Lightweight at 1.41 ounces

Cons

• Only the flat blade is included, not the full unit
• Requires assembly onto your existing mandolin frame
• Limited to flat slicing patterns

Good fit if

• You own a Benriner No. 95 or Jumbo No. 120
• Your current blade is damaged or dull
• You need a replacement for the main slicing body

Skip if

• You want a complete mandolin unit
• You use a different brand of slicer
• You need rotary or julienne blades

Verdict: Benriner Super & Jumbo Flat Blade is the correct replacement part for owners of Benriner No. 95 and Jumbo No. 120 mandolins who need to restore their slicing capability with a genuine stainless steel blade.

Specifications side by side

Frequently asked questions

See also

• best benriner mandolines for vegetables
• best benriner mandolines under 50
• singer singer super bundle review
• outcast super fat cat review